Filter
Top Products
14
✎
NOTE
`
No disc should be in the product when you
upgrade the software using the USB Host jack.
`
When the software upgrade is done, check the
software details in the software Upgrade menu.
`
Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
`
Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
To set Auto Upgrade Notification on, follow
these steps:
1. Select Auto Upgrade Notification, and
then press the
v
button.
2. Use the ▲▼ buttons to select On, and
then press the
v
button.
If there is a new software version available,
the player notifies you with a popup message.
1. To upgrade the firmware, select Yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn on the player
manually here.)
2. The update progress popup appears.
3. When the update is complete, the player
turns off again automatically.
4. Press the POWER button to turn on the
player.
✎
NOTE
`
The update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
`
Never turn the player off or on manually during
the update process.
`
Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.
Contact Samsung
Provides contact information for assistance
with your player.
Terms of Service Agreement
View the general disclaimer regarding third
party contents and services.
Reset
All settings will revert to the factory default
except for the network settings.
Media Play
Insert a Disc
1. Press the
8
button to open the disc
tray.
2. Push a disc gently into the disc tray with
the disc's label facing up.
3. Press the
8
button to close the disc
tray. Playback starts automatically.
4. If playback does not start automatically,
select the Videos option on the Main
screen, and then press the
v
button.
Insert a USB Device
You can play multimedia files located on a
USB storage device.
1. Move to the Home menu.
2. In Stop mode, connect the USB storage
device to the USB port on the back
panel of the player.
The message “Do you want to access
the device?” will be displayed.
3. Press the ◄► button to select Yes,
then press the
v
button.
4. If you have a disc in the Blu-ray player,
press the RED (A) or BLUE (D) button.
If you do not, go to Step 6.
If you pressed the RED (A) button, go to
Step 5.
If you pressed the BLUE (D) button, go
to Step 4
-1
.
5. Press the ▲▼ buttons to select USB,
then press the
v
button.
6. Press the ◄► buttons to select Videos,
Music or Photos, then press the
v
button. Go to Step 7.
4
-1
. If you pressed the BLUE (D) button, the
screen below appears. Go to 5
-1
.
5
-1
. Press the ◄► buttons to select USB,
then press the
v
button.
6
-1
. Press the ▲▼ buttons to select Videos,
Music or Photos, then press the
v
button.
7. The controls and tools you use to play
videos, music, and pictures located on
a USB device are identical to those you
use to play videos, music, and pictures
on a disc. (See pages 15~16)
YouTube
CinemaNow
PANDORA
internet radio
HD Movies
123
a
Change Device
c
Safely Remove USB
d
View Devices
"
Enter
No Disc
123
DLNA
YouTube
CinemaNow
PANDORA
internet radio
HD Movies
123
123
d
Home
"
Enter