Samsung BDE5400 Blu-ray Player User Manual

Open as PDF

of 21

Playlist

1. To move to the Music List, press the

or RETURN button.

The Music List screen appears.

2. Press the ▲▼◄► buttons to move

to a desired track, and then press the

YELLOW (C) button. A check appears

on the track.

Repeat this procedure to select

additional tracks.

3. To remove a track from the list, move to

the track, and then press the YELLOW

The check on the track is cancelled.

4. When done, press the

button.

5. To go to the Music List, press the

RETURN button.

✎

NOTE

You can create a playlist with up to 99 tracks

on Audio CDs (CD-DA).

Playing Photo Contents

You can play photo contents located on a

DVD, CD, or a USB storage device.

Using the Tools Menu

During playback, press the TOOLS button.

Slide Show

Select to start the slide show.

Background

Music

Select to listen to music while

viewing a slide show.

Zoom

Select to enlarge the current

picture. (Enlarge up to 4 times)

Rotate

Select to rotate the picture. (This

will rotate the picture either

clockwise or counter clockwise.)

Information

Shows the picture information.

✎

NOTE

Depending on the disc or storage device, the

Tools menu may differ.

To enable the background music function, the

photo file must be in the same storage media

as the music file.

However, the sound quality can be affected

by the bit rate of the MP3 file, the size of the

photo, and the encoding method.

You can't enlarge the subtitle and PG graphic

in the full screen mode.

Appendix

Troubleshooting

Before requesting service, please try the following solutions.

PROBLEM SOLUTION

No operation can be

performed with the remote

control.

• Check the batteries in the remote control. They may need replacing.

• Operate the remote control at a distance of no more than 20 feet.

• Remove batteries and hold down one or more buttons for several minutes

to drain the microprocessor inside the remote control to reset it. Reinstall

batteries and try to operate the remote control again.

Disc does not play. • Ensure that the disc is installed with the label side facing up.

• Check the region number of the Blu-ray Disc/DVD.

Disc Menu does not appear. • Ensure that the disc has disc menus.

The prohibition message

appears on the screen.

• This message appears when an invalid button is pressed.

• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).

•

You’ve requested a title or chapter number or search time that is out of range.

Play mode differs from the

Setup Menu selection.

• Some of the functions selected in the Setup Menu may not work properly if

the disc is not encoded with the corresponding function.

The screen ratio cannot be

changed.

• The Screen Ratio is fixed on your Blu-ray Disc/DVD.

• This is not a problem with the player.

No audio. • Make sure you have selected the correct Digital Output in the Audio Options

Menu.

The screen is blank. • If the HDMI output is set to a resolution your TV cannot support (for example,

1080p), you may not see a picture on your TV.

• Press the

button (on front panel) for more than 5 seconds with no disc

inside. All settings will revert to the factory settings.

• When the factory default settings are restored, all stored user BD data is

deleted.

Select

()

Jump Page

Return

1/2 Page

Music

TRACK 001