Filter
Top Products
19
Adjusting the Picture Settings
Your television has several settings which allow you to control
picture quality:
u
Colour tone, Contrast, Brightness, Sharpness,
Colour, Tint (NTSC only)
1 Press the MENU button.
Result:
The “Picture” menu is displayed.
2 Press the + or – button.
3 Press the s or t button to select the “Adjust”, and then press the +
or – button.
Result:
The “Adjust” menu is displayed.
â
When select the “Mode” to “Custom”, the “Adjust” menu is
displayed.
4 To adjust the... Press the...
u Colour tone u + or – button.
Result: You select the required option
(Normal, Warm1/2, Cool1/2).
u Contrast u + or – button.
u Brightness Result:
The horizontal bar is displayed.
u Sharpness
u Colour
u Tint (NTSC only)
5 When you are satisfied with the settings, press the TV button or,
press the MENU button repeatedly to return to normal viewing.
â
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss
the television screen, switch power off by pressing the “ ”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing To Remove Colour Patches” on page 37.).
â
Changes made to these settings while the Custom mode is
selected are memorised, and are recalled when you switch
the television back on.
You can select the picture format which best corresponds to
your viewing requirements by simply pressing the “ ” button.
The following picture formats are available:
uu
Auto wide, Panorama, 16:9, 4:3 (Normal), Zoom1, Zoom2
Selecting the Picture Format (depending on the model)
ENG
KS3a_Eng_Wide.qxd 10/19/2002 1:03 PM Page 19