Filter
Top Products
8
The mains lead is attached to the rear of the television.
*
If you have purchased this television in the United
Kingdom, refer to rear cover for further instructions on plug
wiring.
1 Plug the mains lead into an appropriate socket.
â
Use a wall socket with a voltage of between 220 and
240 Volts.
2 Press the “ ” (ON/OFF) button on the front of the television.
Result
: The Standby indicator lights up on the front panel.
3 Press the POWER button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
4 To switch your television off, press the “ ” (ON/OFF) button again
on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to
reduce:
u
Power consumption
u
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when
you turn it on.
1 Press the POWER button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up.
2 To switch the screen back on, simply press the POWER button
again on the remote control.
â
Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for
example). In this case, you should switch it off completely.
Switching Your Television On and Off
KS3a_Eng_Wide.qxd 10/19/2002 1:03 PM Page 8