Filter
Top Products
6
ENG
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
Connect the aerial or network input cable to the 75Ω coaxial socket on
the rear of the television.
Connecting the Aerial or Cable Television Network
Cable Television
Network
or
Rear of the TV
In order to descramble a coded transmission signal, you must
connect a decoder to the TV set.
➢
If you wish to connect both a decoder and a VCR, you
should connect the:
◆ Decoder to the VCR
◆ VCR to the television
Otherwise, connect the decoder directly to the television.
Using a coaxial cable
Connect a coaxial cable to the:
◆ Receiver output socket.
◆ Television aerial input socket.
Connecting a Decoder
DECODER
Rear of the TV
option