Filter
Top Products
English -
41
Recording
5
To play the camcorder and find the starting
point to be copied, select the play icon( )
on the top of the screen using the œ √
buttons and then press the OK button.
6
To start recording, select the record icon( )
on the top of the screen using the œ √
buttons and then press the OK button.
You can also use the REC button on the remote
control to start recording. (If your camcorder is in stop
mode, the REC button doesn't work.)
To stop recording
Press the STOP button to stop a recording in
progress.
●
When using DVD-RW/DVD-R discs, the message
‘Updating the disc information. Please wait for a
moment.’ is displayed
Copying from a Camcorder
You may control the Camcorder using the IEEE1394
(DV) interface.
Check that the disc has enough available space for
the recording. Adjust the recording mode.
1
Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close
the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 37.)
3
Press the REC MODE button repeatedly,
(or Press the REC MODE button, then
press the …† button) to select the
recording speed(quality).
➞
SP ➞ LP ➞ EP ➞ XP
4
Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables camcorder control appears on the top of the
screen.
Before you start
■
You can not change the recording mode and
input source while recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
DVD-RW discs must be formatted before
starting to record. Most new discs are sold
unformatted.
■
Do not use DVD-R authoring discs with this
DVD Recorder.
■
If you connect a camcorder using DV Jack,
the related control menu appears
automatically. To access on the screen
controls during recording, press the
œ
or
√
button.
NOTE
Record Mode SP(02:12)
DV
The DV device is connected.
RETURNOKMOVE
01094A-R135-XSS-ENG_38~46 3/28/06 4:22 PM Page 41