Samsung DVD-V7070 DVD Player User Manual


 
If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
NOTE: Select “Bitstream” ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD-VCR back panel.
1 Open SETUP MENU
With the DVD in stop mode, press the SETUP button.
2 Select DVD
Using the up/down and left/right buttons, move the selection cursor
to DVD Setup, then press ENTER to select.
3 Select Audio Options
Move the selection bar to Audio Options, then press ENTER to
select.
4 Set Digital Output
Move the selection bar to Digital Output then press the right
button to select from the following options:
PCM - To use your DVD/TV with an A/V receiver NOT equipped
with a Dolby Digital decoder.
Bitstream To use your DVD/TV with an A/V receiver equipped
with a Dolby Digital decoder.
Digital Output
27
Parental
Rating Control is a password protected system that allows you to
block playback of DVDs based on their content. The system uses an
eight level rating system.
• If you try to play a DVD that exceeds the selected rating, an error
message will appear.
• Not all discs are rated.
1 Open SETUP MENU
With the DVD in stop mode, press the SETUP button.
2 Select DVD
Using the up/down and left/right buttons, move the selection cursor
to DVD Setup, then press ENTER to select.
3 Select Parental
Move the selection bar to Parental, then press ENTER to select.
4 Select Use Password
Move the selection arrow to Use Password, then press the right
button to select from the following options:
No - Indicates that no password is required to view any DVD
disc or to change Rating Control options. No additional Rating
Control settings are necessary.
Yes Indicates that a password is required to view some DVD
discs and to view Rating Control options. The menu will change
as shown.
NOTES:
The first time Require Password is set to Yes, you will be
prompted to enter a new password.
If the Enter Password screen appears, then Require
Password has already been set to Yes. Please skip to Step 5.
5 Enter Password
Enter a 4-digit password using the 09 buttons on the remote
control.
Write your password down, and keep it in a safe place in case
you need it to change your settings later.
6 Select Rating Level
Move the selection bar to Rating Level, then press ENTER to
select.
7 Change Rating Level
Use the up/down to select one of the following ratings:
Level 8 Adult Level 4
Level 7 Level 3
Level 6 Level 2
Level 5 Level 1 Kids Safe
All ratings above the level you select will also be blocked, e.g., if
you block Level 6, then Levels 7 and 8 will also be blocked.
Press ENTER to confirm your selection.
If you forgot your password, press power on from a cold start
with no disc in the unit. Press the REW and F.F buttons
simultaneously on the front panel for 5 seconds. The reset ok
message will appear. Press the power button and the DVD-VCR
will go to the Auto Setup mode. (See page 13)
26
MAIN MENU
DVD Setup
RETURN
➐❷☎☎
➛☎☎☎❿
ENTER
Program Clock Channel Exit
DVD VCR Option Language
DVD
RETURN
➐❷☎☎☎☎☎☎☎☎☎☎
ENTER
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN ENTER
PARENTAL
Use Password
➛☎❿
No
RETURN PRESS 0-9
PASSWORD CHECK
Enter Password
_ _ _ _
RETURN
➐❷☎
ENTER
PARENTAL
Use Password
➛☎❿
Yes
Rating Level 1
Change Password
RETURN
➐❷☎
ENTER
RATING LEVEL
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
MAIN MENU
DVD Setup
RETURN
➐❷☎☎
➛☎☎☎❿
ENTER
Program Clock Channel Exit
DVD VCR Option Language
DVD
RETURN
➐❷☎☎☎☎☎☎☎☎☎☎
ENTER
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN
➐❷
AUDIO OPTIONS
Digital Output
➛☎☎❿
PCM
DTS off
Dynamic Compression on
PCM
Bitstream
00044A DVD-V7070/AFR-Eng2 3/21/03 2:31 PM Page 26