Samsung DVD-V8080 DVD Player User Manual


 
2726
To set the Subtitle Language to your preferred language, follow
these steps. If your preferred language is available on a DVD, your
Subtitle Language will automatically be set to the language you
choose.
1 Open MENU
Press the MENU button while the DVD is in Stop mode.
2 Select DVD
Use the UP/DOWN buttons to highlight DVD
then press the ENTER button.
3 Select Language
Move the selection bar to Language then press ENTER to select.
4 Select Subtitle
Highlight Subtitle, then press the ENTER button.
5 Set Subtitle Language Preference
Highlight your preferred language for subtitles, then press the
ENTER button.
Subtitle Language
Subtitle
Subtitle Language
Automatic
If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
NOTE: Select “Bitstream” ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD-VCR back panel.
1 Open MENU
Press the MENU button while the DVD is in Stop mode.
2 Select DVD
Use the UP/DOWN buttons to highlight DVD
then press the ENTER button.
3 Select Audio
Highlight Audio, then press the ENTER button.
4 Set Digital Output
Highlight Digital Output then press the RIGHT button to select
one of the following options:
PCM - To use your DVD/TV with an A/V receiver without a
Dolby Digital decoder.
Bitstream To use your DVD/TV with an A/V receiver with a
Dolby Digital decoder.
Digital Output
PCM Down Sampling : On
PCM
Bitstream
Language : English
Front Display : Auto
Auto Power Off : Off