Samsung DVD-V8080 DVD Player User Manual


 
2928
If your A/V receiver is equipped with a DTS decoder, your DVD-
VCR can output DTS digital sound, but you MUST enable this
feature in the menu system.
NOTE: Select “On” ONLY if you have connected a DTS-equipped
A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on
the DVD-VCR back panel.
1 Open MENU
Press the MENU button while the DVD is in Stop mode.
2 Select DVD
Use the UP/DOWN buttons to highlight DVD
then press the ENTER button.
3 Select Audio
Highlight Audio, then press the ENTER button.
4 Set DTS
Highlight DTS then press the RIGHT button to select one
of the following options:
Off - To use your DVD/TV with an A/V receiver NOT equipped
with a DTS decoder.
On To use your DVD/TV with an A/V receiver equipped with a
DTS decoder.
DTS
PCM Down Sampling : On
Dynamic Compression
Dynamic Compression restrains the dynamic range of sound, i.e.
the difference between the loud and quiet passages of a DVD audio
track.
1 Open MENU
Press the MENU button while the DVD is in Stop mode.
2 Select DVD
Use the UP/DOWN buttons to highlight DVD
then press the ENTER button.
3 Select Audio
Highlight Audio, then press the ENTER button.
4 Set Dynamic Compression
Highlight Dynamic Compression, then press the RIGHT button to
select one of the following options:
On - This will compress the total dynamic range of the DVD
audio, making quiet passages in the audio signal louder and
loud passages softer.
Off This will preserve the original dynamic range.
PCM Down Sampling : On
Off
On
Off
On
Language : English
Front Display : Auto
Auto Power Off : Off
Language : English
Front Display : Auto
Auto Power Off : Off