Filter
Top Products
3332
Alt Video Out
On
Display Setup
The “Alt Video Out” option must be set in the on-screen menu if
you have connected your DVD-VCR to a TV using the S-VIDEO
OUT or COMPONENT VIDEO OUT jacks.
• Use the S-Video or Component Video connection method only
for the DVD player. The tuner and VCR can still be viewed
through the RF or line outputs.
1 Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2 Select “DVD”
Use the UP/DOWN buttons to highlight “DVD,”
then press the ENTER button.
3 Select “Display”
Highlight “Display”, then press the ENTER button.
4 Set “Alt Video Out”
Highlight “Alt Video Out,” then press the RIGHT button to select
one of the following options:
• S-Video - Select this if you are using the S-Video OUT jack on
the rear panel to connect to a TV.
• Component - Select this if you are using the COMPONENT
VIDEO OUT jacks on the rear panel to connect to a Interaced
(480i) TV.
• See your TV owner’s manual to determine what type of TV you
have.
- Interlace : Interaced Scan mode will work.
Black Level
The Black Level feature adjusts the reference level of black in the
video signal to one of two choices:
• Off - Standard NTSC black level. Yields consistent contrast
through all sources.
• On - Enhanced black level, for increased contrast during DVD
playback.
1 Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2 Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”
then press the ENTER button.
3 Select “Display”
Highlight “Display”, then press the ENTER button.
4 Set “Black Level”
Highlight “Black Level,” then press the RIGHT button to select one
of the following options:
• On - This will enhance the Black Level for increased
brightness/contrast when viewing DVDs.
• Off - This is the Standard NTSC reference Black Level for
consistent brightness/contrast across all sources.
On
Display Setup
On
Off
Language : English
Front Display : Auto
Auto Power Off : Off
Language : English
Front Display : Auto
Auto Power Off : Off
S-Video
Interlace