Filter
Top Products
User’s Manual
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
103
5.4.5 ezRecord Setup
This item aims to avoid the complicated record settings and to make the setup
much easier. Note that this item can be reached only when you select
<ezRecord> as the option for <Preset Config>. For more information, please
refer to the appendix ezRecord Diagram Sample.
Select <ezRecord Setup> from <Record Setup> and press ENTER, the
sub-menu appears as shown below:
ezRecord Setup
How Many Days To Record
Daytime Record
Night Record
Weekend Record
Average Normal PPS
Average Normal Quality
2 Days
Yes
Yes
Yes
3.75
Best
Follow these steps to Setup ezRecord:
• Select <How Many Days To Record> and press ENTER, then press
UP/DOWN to choose an option. The average normal PPS & Quality will
be adjusted automatically. The maximum of days depends of the size of
your HDD, in the other words, the larger the HDD installed, the more days
the unit can record.
• Move to <Daytime Record> and press ENTER. This item is for you to
select whether you want the DVR to record during daytime. If so, use
UP/DOWN to select <Yes> as an option; or, select <No> for not recording
during daytime.
• Repeat the same procedures through the 3rd and 4th item, respectively.
Note that <Weekend Record> will be not accessible if you select <NO> for
the item <Weekend Schedule> in <Schedule Setup>.
• Select <Average Normal PPS> and press ENTER, then press UP/DOWN
to choose an option. The <How Many Days To Record> will be computed
automatically.
• Select <Average Normal Quality> and press ENTER, then press
UP/DOWN to choose an option. The <How Many Days To Record> will be
computed automatically.
Record Info