Filter
Top Products
1.3 CHAPTER ONE: YOUR NEW TV
YOUR NEW TV
Œ
PERFECT FOCUS
Press to adjust for the optimum picture set in the Factory.
´
VIDEO INPUT jack
Use to connect a video signal from a camcorder or a video
game.
ˇ
AUDIO INPUT jacks
Use to connect the audio signals from a camcorder or video
game.
¨
S-VIDEO INPUT jack
Use to connect an S-Video signal from a camcorder or a
video game.
Front or Side Panel Jacks
You can use the front or side panel jacks to connect an A/V component that is used only
occasionally, such as a camcorder or video game. (For information on connecting
equipment, see pages 2.1 – 2.8.)
Using the Component Shelf
(HCM5525W/HCM653W/HCM553W/HCL473W)
You can place a VCR, a DVD player, etc. on the Component Shelf.
1
Press the symbol ““
in the center of the
Component Shelf door.
2
As shown in figure
below, hold the center
of door and lift it up.
3
After placing a com-
ponent on the shelf,
hold the center of door
and pull it down as
shown in figure below.
4
Shut the door by
pressing the ““
symbol.
➔
Note: When placinga component on
the shelf, make sure it is no more
than 5 inches tall and leave one inch
of space from the front and sides for
ventilation.