Filter
Top Products
INSTALLATION
18
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR.
1
Locate the A/V output jacks on the camcorder. They are
usually found on the side or rear of the camcorder.
2
Connect a set of audio cables between the “AV 3 (L, R)”
jacks on the TV and the AUDIO OUT jacks on the camcorder.
If you have mono camcorder, connect L(mono) to
camcorder audio out using only one audio cable.
3
Connect a video cable between the “AV 3 (VIDEO)”
(or “S-VIDEO2 INPUT”) jack on the TV and the VIDEO OUT
jacks on the camcorder.
The audio-video cables shown here are usually included
with a Camcorder. (If not, check your local electronics
store.) If your camcorder is stereo, you need to connect a
set of two cables.
Connecting to the Digital Audio Input
The rear panel jacks on your TV make it easy to connect a device with digital audio output.
After making a connection, set the audio input by reference to page 51.
Connect a audio (or optical) cable between the
“COAXIAL IN” (or “OPTICAL IN”) jack on the TV
and the AUDIO OUT jack on a device with digital
audio output.
BP68-00342A-00Eng_TV 3/31/04 9:22 AM Page 18