Filter
Top Products
19
INSTALLATION
1
Slide the back cover all the
way out to open the battery
compartment of the remote
control.
2
Install two AAA size batteries.
Installing Batteries in the Remote Control
œ Make sure to match the “+”
and “
–” ends of the batteries with
the diagram inside the
compartment.
3
Replace the cover.
œ Remove the batteries and store
them in a cool, dry place if you
won’t be using the remote control
for a long time. (Assuming typical
TV usage, the batteries last for
about one year.)
• The remote control can be used up to about 23 feet from the TV.
Connecting Additional Speakers
The rear panel jacks on your TV make it easy to take advantage of the surround sound system.
1
Connect speaker audio cables to “SURROUND
SPEAKER OUT” terminals on the TV.
To improve the sound quality, connect the Red wire to
the Red terminal and Black wire to the Black terminal.
2
The factory default of “SURROUND SPEAKER OUT
SELECTION” is set to “INT” (Internal). For sound
output to external speakers, set to “EXT” (External),
then sound to the internal speaker is off.
• The speakers MUST have to a power handling capability of 10 watts minimum (impedance 8 Ω).
BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 19