Filter
Top Products
49
TV OPERATION
3
Press the … or † button to
select “Dynamic Range”, then
press the ENTER button.
Press the … or † button to
select “On”, then press the
ENTER button.
Dolby Pro Logic II : On
√√
Dynamic Range : Off
√√
Level Control
√√
Time Delay
√√
Move Enter Return
Dolby Digital
T V
Off
On
Setting the Dynamic Range
Reduces the difference between low and high pitched tones to suitable output levels,
recommended for night time use.
œ This function only works when
Dolby Digital is activated.
4
Press the … or † button to
select “Level Control”, then
press the ENTER button.
Press the ENTER button to select
“Test Tone”.
Press the … or † button to
select “On”, then press the
ENTER button.
Test Tone : Off
√√
Front Left 0 dB
Center 0 dB
Front Right 0 dB
Rear Right 0 dB
Rear Left 0 dB
Sub Woofer 0 dB
Move Enter Return
Level ControlT V
Adjusting Speaker Levels
The Test Tone confirms the speaker connections and aligns the levels of the speaker outputs.
The order of the Test Tone sounds is as follow: Front Left -> Center -> Front Right -> Rear
Right -> Rear Left -> Sub Woofer
œ The Test Tone for the sub
woofer is very low frequency.
This is normal, not a malfunction.
Off
On
5
Press the … or † button to
select the speaker to be
adjusted, then press the ENTER
button.
Press the œ or √ button to
increase or decrease the volume
of selected speaker, then press
the ENTER button.
Test Tone : On
√√
Front Left 0 dB
Center 0 dB
Front Right 0 dB
Rear Right 0 dB
Rear Left 0 dB
Sub Woofer 0 dB
Move Adjust Return
Level ControlT V
BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 49