Filter
Top Products
English - 40
You can activate and deactivate the subtitles.
1. Press the D.M
ENU button to display the DTV menu.
2. Press the ▲ or ▼
button to select "Setup", then press the
ENTER/OK button.
3. Press the ▲ or ▼
button to select "Subtitle ", then press the
ENTER/OK button.
4. Select "On" by pressing the ▲ or ▼
button. Press the
ENTER/OK button.
5. Press the EX
IT button to exit.
Setting the Subtitle
Move Enter Return
Setup
Menu Transparency
: Medium
Change PIN
Parental Lock
Subtitle : On
Subtitle Mode : Normal
▼
Move Enter Return
Off
On
Use this menu to set the Subtitle Mode. "Normal" under
the menu is the basic subtitle and "Hard of hearing" is the
subtitle for a hearing-impaired person.
1. Press the D.M
ENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
E
NTER/OK button.
3. Press the ▲ or ▼ button to select "Subtitle Mode", then
press the E
NTER/OK button.
4. Press the ▲ or ▼ button to select "Normal" or
"Hard
of hearing". Press the ENTER/OK button.
5. Press the EX
IT button to exit.
If the programme you are watching does not support the
"Hard of hearing" function, "Normal" automatically activates
even though "Hard of hearing" mode is selected.
Setting the Subtitle Mode
Move Enter Return
Setup
Menu Transparency
: Medium
Change PIN
Parental Lock
Subtitle
: On
Subtitle Mode : Normal
▼
Move Enter Return
Normal
Hard of hearing
You can only hear Dolby Digital sound through the audio
receiver connected through an optical cable. You can only
hear PCM sound through the main speaker.
When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver. In this case, use the internal mute function.
1. Press the D.M
ENU button to display the DTV menu.
2. Press the ▲ or ▼
button to select "Setup", then press the
ENTER/OK button.
3. Press the ▲ or ▼ button to select "Audio Format", then press the E
NTER/OK button.
4. Press the ▲ or ▼ button to select "PCM" or "Dolby Digital". Press the ENTER/OK button.
5. Press the EX
IT button to exit.
The Audio Format appears according to the broadcasting signal.
Dolby digital sound is only available when the TV is connected with an external speaker using an
optical cable.
Selecting the Audio Format
Setup
Audio Format
: PCM
Digital T
ext : Enable
Time Zone
System
Move Enter Return
BN68-01169L-00Eng-0731.indd 40 2007-08-17 �� 3:38:55