Samsung LN19R81B Flat Panel Television User Manual


  Open as PDF
of 91
 
English - 25
Image Lock:
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency as best
as possible (coarse) and Fine-tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of screen.
1. Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect“Setup”,thenpresstheENTER button.
3. Pressthe▲or▼buttontoselect“PC”,thenpresstheENTER button.
4. Press the ENTER button to select “Image Lock”.
5. Pressthe▲or▼buttontoselect“Coarse”or“Fine”,thenpresstheENTER button.
6. Pressthe◄or►buttontoadjustthescreenquality,verticalstripesmayappearorthe
picture may be blurry. Press the ENTER button.
7. Press the EXIT button to exit.
Position:
Adjust the PC’s screen positioning if it does not fit the TV screen.
1. Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect“Setup”,thenpresstheENTER button.
3. Pressthe▲or▼buttontoselect“PC”,thenpresstheENTER button.
4. Pressthe▲or▼buttontoselect“Position”,thenpresstheENTER button.
5. Pressthe▲or▼buttontoadjusttheV-Position(Vertical-Position).
Pressthe◄or►buttontoadjusttheH-Position(Horizontal-Position).
Press the ENTER button.
6. Press the EXIT button to exit.
Image Reset:
You can replace all image settings with the factory default values.
1. Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect“Setup”,thenpresstheENTER button.
3. Pressthe▲or▼buttontoselect“PC”,thenpresstheENTER button.
4. Pressthe▲or▼buttontoselect“ImageReset”,thenpresstheENTER button.
5. Press the EXIT button to exit.
Auto Adjustment:
Auto adjustment allows you to set the TV to self-adjust to the incoming PC video signal.
The fine, coarse and position values are adjusted automatically.
1. Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect“Setup”,thenpresstheENTER button.
3. Pressthe▲or▼buttontoselect“PC”,thenpresstheENTER button.
4. Pressthe▲or▼buttontoselect“AutoAdjustment”,thenpresstheENTER button.
5. Press the EXIT button to exit.
Setting up the TV with your PC
SetupTV
Setup
Plug & Play
Language : English
Time
Caption
Blue Screen : Off
PC
Light Effect : Off
Move Enter Return
PC
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter Return
Image Lock
Move Enter Return
Coarse
Fine
1680
83
PC
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter Return
Position
Adjust Enter Return
PC
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter Return
PC
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter Return
BN68-01184D-00Eng-0806.indd 25 2007-08-06 �� 3:31:47
 previous next