Filter
Top Products
English-15
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1 If the set is in standby mode, press the POWER ( ) button on the
remote control.
Result
:
The message
Plug & Play
is displayed. It appears for a
little while, and then the
Language
menu is automatically
displayed.
2 Select the appropriate Language by pressing the or ❷ button.
➣
The available languages are listed
.
You can choose one of 18 Languages.
3 Press the
ENTER
or ❿ button to confirm your choice.
Result
:
The message Ant. Input Check is displayed with the OK
is selected.
4 Press the
ENTER
or ❿ button.
Result
:
The following countries are available:
Belgie
-
Deutschland
-
Espania
-
France
-
Italia
-
Nederland
-
Schweiz
-
Sverige
-
UK
-
East Europe
-
Others
5 Select your Country by pressing the or ❷ button.
Press the
ENTER
or ❿ button.
Result
:
The channel search will start and end automatically.
6 Select the Hour or Min by pressing the ➛or ❿ button.
Set the
Hour/Min by pressing the or ❷ button.
(
Refer to “Switching the television on and off automatically” on page 40
)
7 Press the
ENTER
button to confirm your setting.
Result
:
The
message Enjoy Your Watching is displayed, and
then the channel which has been stored will be activated.
POWER
P.MODETV SELECT
BN68-448D-03Eng 10/29/03 1:09 AM Page 15