Filter
Top Products
English-20
Storing Channels Manually (continued)
9 If you know the number of the channel to be stored....
◆ Press the or ❷ button to select Channel and then press the
ENTER
or ❿ button.
◆ Select C (Air channel) or S (Cable channel) by pressing the
or ❷ button and then press the
ENTER
or ❿button.
◆ Select the required number by pressing the or ❷ button and
then press the
ENTER
or ❿ button.
➣
If there is abnormal sound or no sound, re-select the sound
system required.
10 If you do not know the channel numbers, press the or ❷ button to
select
Search and then press the
ENTER
or ❿button.
Search by pressing or ❷ button and then press the
ENTER
or
❿ button.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
11 Press the or ❷ button to select Store and then press the
ENTER
or ❿ button.
Select
Yes by pressing the or ❷ button and then press the
ENTER
button.
Result
: The channel and associated programme number are
stored.
12 Repeat Steps 9 to11 for each channel to be stored.
☛
Channnnel mode
◆
P (Programme mode): When tuning is completed, the
broadcasting stations in your area will have been
assigned to position numbers from P00 to P99. You can
select a channel by entering the position number in this
mode.
◆
C (Real channel mode): You can select a channel by
entering the assigned number to each broadcast station in
this mode.
◆
S (Cable channel mode): You can select a channel by
entering the assigned number to each cable channel in
this mode.
BN68-448D-03Eng 10/29/03 1:09 AM Page 20