Filter
Top Products
46
Preparations
1
1 Preparations
Input source control
z Function
The input source of a TV/monitor can be changed using a PC.
z Viewing input source state (Get Input Source Status)
z Setting the input source (Set Input Source)
"Input Source": An input source code to be set on a TV/monitor
DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only
respond to "Get" commands.
This model does not support BNC, S-Video, HDMI1, HDMI1_PC, HDMI2, HDMI2_PC, and
DisplayPort.
MagicInfo is only available with models that contain the MagicInfo function.
RF(TV) and DTV are only available with models that include a TV.
Header Command
ID
Data length
Checksum
0xAA 0x14 0
Header Command
ID
Data length Data
Checksum
0xAA 0x14 1
"Input
Source"
0x14 PC
0x1E BNC
0x18 DVI
0x0C Input source
0x04 S-video
0x08 Component
0x20 MagicInfo
0x1F DVI_video
0x30 RF(TV)
0x40 DTV
0x21 HDMI1
0x22 HDMI1_PC
0x23 HDMI2
0x24 HDMI2_PC
0x25 DisplayPort