Filter
Top Products
39
Using "PCoIP"
2
2 Using "PCoIP"
z When you make a change to one of the settings on this page, you must reboot your device for the
change to take effect.
Figure 2-4: IPv6 Configuration
z Enable IPv6
Enable this field to enable IPv6 for your PCoIP devices.
z Link Local Address
This field is automatically populated.
z Gateway
Enter the gateway address.
z Enable DHCPv6
Enable this field to set up Dynamic Host Configuration Protocol version 6 (DHCPv6) for your device.
z Primary DNS
The primary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically populated
by the DHCPv6 server.
z Secondary DNS
The secondary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
z Domain Name
The domain name used (e.g., 'domain.local') for the host or client. If DHCPv6 is enabled, this field is
automatically populated by the DHCPv6 server.
z FQDN
The fully qualified domain name for the host or client. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.