Filter
Top Products
45
Using "PCoIP"
2
2 Using "PCoIP"
Figure 2-11: Display Configuration
z Enable display override
This option is intended for legacy systems. It configures the client to send default EDID information
to the host when a monitor cannot be detected or is not attached to the client. In versions of
Windows prior to Windows 7, once the host had no EDID information, it would assume no monitors
were attached and would never recheck. This option ensures that the host always has EDID
information when the client is in session.
The following default resolutions are advertised when this option is enabled:
z 800x600 @ 60 Hz
z 1024x768 @ 60 Hz (native resolution advertised)
z 1280x800 @ 60 Hz
z 1280x960 @ 60Hz
z 1280x1024 @ 60 Hz
z 1600x1200 @ 60 Hz
z 1680x1050 @ 60 Hz
z 1920x1080 @ 60 Hz
z 1920x1200 @ 60 Hz