Filter
Top Products
40
Using "PCoIP"
2
2 Using "PCoIP"
z Enable SLAAC
Enable this field to set up stateless address auto-configuration (SLAAC) for your devices.
z Enable Manual Address
Enable this field to set up a manual (static) address for the device.
z Manual Address
Enter the IP address for the device.
Label Tab
The Label page is available from the host or client. The Label page lets you add information for the
device.
The Network parameters can also be configured using the Administrative Web Interface.
Figure 2-5: Label Configuration
z PCoIP Device Name
If the PCoIP Device Name allows the administrator to give the Host or Portal a logical name. The
default value is pcoip-host-MAC or pcoip-portal-MAC where MAC is the MAC address of the Host
or Portal.
z PCoIP Device Description
A description and additional information such as the location of the endpoint for the device. The
firmware does not use this field. It is provided for administrator use only. It is provided for
administrator use only.
z Generic Tag
Generic tag information about the device. The firmware does not use this field. It is provided for
administrator use only.