10
z “REW” or “FF*2/4/6” sign will be indicated in top left corner on the screen.
Press
Pause button to pause (field by field) for forward. This function can be used in full
screen and quad mode (If you choose QUAD in recording mode than it can’t playback in full
screen).
z “PAUSE” sign will be indicated in top left corner on the screen.
Press the STOP button to leave playback mode and resume the Live Mode.
When overwrite mode is enabled with 2 hard drives, drive which is overwriting will cause recording
time being divided to 2 periods as picture below:
TIME SEARCH
> MASTER HARD DRIVE
2004/JUN/13 04:12:03
RECORD SEGMENT 1
START TIME : 2004/JUN/21 07:51:13
END TIME : 2004/JUN/22 21:59:03
RECORD SEGMENT 2
START TIME : 2004/JUN/24 23:18:42
END TIME : 2004/JUN/25 12:15:50
PRESS[UP,DOWN,ENTER] TO SET
PRESS[PLAY] TO PLAY,[MENU] TO EXIT
There will be 2 periods of time as RECORD SEGMENT 1 and RECORD SEGMENT 2 in master
drive which means the oldest data and newest data both existing on the same hard drive.
Above rules will also apply to slave hard drive.
4 Hard disk and CF Card recommend
Maximum 2 pieces and at lease one hard disk should be connect, the capacity of hard disk from
40GB to 250GB for each.
When you restart the power of this appliance after install or replace new hard disk it will be format
automatically, we been tested the follow model of hard disk and recommend you use when you
install by yourself.
Brand Model Capacity Speed (rpm)
Seagate ST3120023A 120GB 7200 rpm
Seagate ST380020A 80GB 7200 rpm
Maxtor 6Y120L0 120GB 7200 rpm
Maxtor 6Y160P0 160GB 7200 rpm
Seagate ST3160023A 160GB 7200 rpm
Maxtor 7Y250P0-A 250GB 7200 rpm
We DO NOT suggest Samsung hard drive base on technical examination
CF Card Brand Capacity
San Disk 128M
San Disk 256M
Transcend 128M
We DO NOT suggest Hagiwara CF Card