Samsung PL-42C71HP Flat Panel Television User Manual


 
English-24
To Select the Source
Press the SOURCE button on the remote control to view an external signal source.
You can enter TV mode directly by using the TV button on the remote control.
You can enter HDMI mode directly by using the HDMI button on the remote control.
(PL-42C91HP/50C91H/42C71HP models only)
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the
or
button to select “Input”, then press the ENTER button.
Press the
or
button to select “Edit Name”, then press the ENTER button.
2. Press the
or
button to select “AV1”, “AV2”, “S-Video”, “Component1”,
“Component2”, “PC”, or “HDMI” input jack, then press the ENTER button.
In case of PL-42Q91HP/50Q91HP models, the Source List displays HDMI1 and
HDMI2 instead of HDMI.
3. Press the
or
button to select “VCR”, “DVD”, “D-VHS”, “Cable STB”,
“HD STB”, “Satellite STB”, “AV Receiver”, “DVD Receiver”, “Game”,
“Camcorder”, “DVD Combo”, “DHR”, or “PC” input source, then press
the ENTER button.
Press the EXIT button to exit.
When a PC with a resolution of 640 x 480@60Hz is connected to the HDMI IN 1 port,
you should set the HDMI1 mode to PC in the Source List of Input mode. If the HDMI1
mode is not PC, it may work depending on the TV setting.
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
1. Press the MENU button to display the menu.
Press the
or
button to select “Input”, then press the ENTER button.
2. Press the ENTER button to select “Source List”.
Press the
or
button to select signal source, then press the ENTER button.
You can choose between the following sets of jacks: AV1, Component1, Component2,
PC, HDMI on the TV’s rear panel and AV2 or S-Video on the TV’s side panel.
HDMI input can only be selected when the external device is turned on and connected
via HDMI.
In case of PL-42Q91HP/50Q91HP models, the Source List displays HDMI1 and HDMI2
instead of HDMI.
You can choose only those external devices that are connected to the TV.
Source List : TV
Edit Name
Input
TV
Move Enter
Source List : TV
Edit Name
Input
TV
Move Enter
AV1 :
-----
AV2 :
-----
S-Video :
-----
Component1 :
-----
Component2 :
-----
PC :
-----
HDMI :
-----
Edit Name
TV
Move Enter
AV1 :
-----
AV2 :
-----
S-Video :
-----
Component1 :
-----
Component2 :
-----
PC :
-----
HDMI :
-----
Edit Name
TV
Move Enter
TV
AV1 :
-----
AV2 :
-----
S-Video :
-----
Component1 :
-----
Component2 :
-----
PC :
-----
HDMI :
-----
Source List
TV
Move Enter
-----
VCR
DVD
D-VHS
Cable STB
HD STB
Satellite STB
Return
Return
Return
Return
Return
BN68-01183X-00Eng 5/11/07 2:39 PM Page 24