When you start using your PDP Display for the first time, you must
select the language which will be used for displaying menus and
indications.
1 Press the MENU ()button.
Result
: The main menu is displayed.
2 Press the … or † button to select Setup.
Result
: The Setup menu is displayed.
3 Press the ENTER () button.
4 Press the … or † button to select Language.
Press the
ENTER () button.
Result
: The available languages are listed.
5 Select the appropriate language by pressing the … or † button.
Press the
ENTER () button.
6 Press the EXIT button to exit.
Choosing Your Language
The mains lead is attached to the rear of your PDP Display.
1 Plug the mains lead into an appropriate socket.
Result
: The Standby indicator on the front of the PDP Display
lights up.
➢
The main voltage is indicated on the rear of the PDP
Display and the frequency is 50 or 60Hz.
2 Press the “ ” button on the front of the PDP Display (or the ON
() button on the remote control) to switch the PDP Display on.
3 To switch your PDP Display off, press the “ ” button again (or
the
OFF () button on the remote control).
T
Front of the PDP Display
Switching Your PDP Display On and Off
English - 15
Time
Language : English
PC
Setup
Move Enter Return
Time
Language :English
PC
Setup
Move Enter Return
English
Français
Deutsch
Italiano
Español
Português
††
BN68-01304A-00Eng 5/31/07 3:56 PM Page 15