Filter
Top Products
English - 33
e
Displaying the Setting Information
You can view the setting status you select by pressing the “INFO”
button on the remote control.
Setting and Displaying the Current Time
You can set the PDP Display’s clock so that the current time is
displayed by pressing the “INFO” button. You must also set the
time if you wish to use the automatic on or off timers.
1 Press the MENU () button.
Result
: The main menu is displayed.
2 Press the … or † button to select Setup.
Result
: The
Setup menu is displayed.
3 Press the ENTER () button.
4 Press the … or † button to select Time.
Press the ENTER () button.
Result
: The Clock Set is selected.
5 Press the ENTER () button again.
6 Press the œ or √ button to select Hour or Minute.
Set these by pressing the
… or † button.
➢
You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
7 Press the ENTER () button.
8 Press the EXIT button to exit.
➢
In the event of a power interruption or the set being turned off at
the supply, the settings for the Clock will be lost.
AV
Picture : Dynamic
Sound : Custom
SRS TS XT : Off
--
:
--
Time
Language : English
PC
Setup
Move Enter Return
Clock Set 12: 00
On Timer 12: 00 Off
Off Timer 12: 00 Off
Time
Move Enter Return
Clock Set
Move Adjust Return
Hour
12 00
Minute
BN68-01304A-00Eng 6/25/07 11:34 AM Page 33