Filter
Top Products
English - 38
Viewing an External Signal Source
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1 Press the MENU () button.
Result
: The main menu is displayed.
2 Press the … or † button to select Input.
Result
: The Input menu is displayed.
3 Press the ENTER () button.
Result
: The Source List is selected.
4 Press the ENTER () button again.
5 Press the … or † button to select the signal source, press the
ENTER () button.
Result
: The available signal sources are listed.
➢
◆
AV, S-Video, Component, PC1, PC2, or DVI
◆
You can also set these options simply by pressing the
SOURCE button on the remote control.
6 Repeat steps 1 to 3.
Result
: The Input menu is displayed again.
7 Press the … or † button to select Edit Name.
Press the
ENTER () button.
8 Press the … or † button to select external source to be edited.
Press the
ENTER () button.
Result
: The available device names are listed.
VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB,
AV Receiver, DVD Receiver, Game, Camcorder,
DVD Combo, DHR (DVD HDD Recorder),or PC
9 Select the required device by pressing the … or † button.
Press the
ENTER () button.
10 Press the EXIT button to exit.
➢
If you change the external source while viewing, it might
take a short period of time for picture to be switched.
Source List : AV
Edit Name
Input
Move Enter Return
Source List : AV
Edit Name
Input
Move Enter Return
AV :
----
S-Video :
----
Component :
----
PC1 :
----
PC2 :
----
DVI :
----
Edit Name
Move Enter Return
AV :
----
S-Video :
----
Component :
----
PC1 :
----
PC2 :
----
DVI :
----
Source List
Move Enter Return
----
VCR
DVD
D-VHS
Cable STB
††
☛
BN68-01304A-00Eng 5/31/07 3:52 PM Page 38