Filter
Top Products
English - 31
.
e
e
d
n
e
Setting the Screen Burn Protection Timer
You can set the timer for Screen Burn Protection (hours, minutes).
If you start the operation to erase any residual image, the operation
will be performed for the set period of time and then automatically
finish.
1 Press the MENU ()button.
Result
: The main menu is displayed.
2 Press the … or † button to select Function.
Result
: The Function menu is displayed.
3 Press the ENTER () button.
4 Press the … or † button to select Screen Burn Protection.
Press the
ENTER () button.
5 Press the … or † button to select Timer.
Press the
ENTER () button.
Result
: The Timer menu is displayed.
6 Press the ENTER () button again.
7 Select On by pressing the … or † button.
Press the
ENTER () button.
8 Select the required option by pressing the … or † button.
Result
: The following options are available.
◆ Mode : All White, Signal Pattern, Inverse,
Bar, Bar & Inverse
◆ Period : Hour(1~24)
◆ Time : Minute(1~30)
9 Press the EXIT button to exit.
Pixel Shift
All White
Signal Pattern
Inverse
Bar
Bar & Inverse
Timer
Screen Burn Protection
Move Enter Return
Timer : Off
Mode : Signal Pattern
Period : 1 Hour
Time : 30 min.
Timer
Move Enter Return
Off
On
Timer : On
Mode : Signal Pattern
Period : 01 Hr.
Time : 05 min
Timer
Move Enter Return
All White
Signal Pattern
Inverse
Bar
Bar & Inverse
Timer : On
Mode : All White
Period : 01
Time : 30 min.
Timer
Move Enter Return
01
▲
▲
Timer : On
Mode : All White
Period : 1 Hour
Time : 30
Timer
Move Enter Return
30
▲
▲
BN68-01304A-00Eng 5/31/07 3:52 PM Page 31