English - 11
6 Select your country or area by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
The message Some DTV functions may not be available.
Digital Scan? is displayed.
If your country supports the DTV functions, the message is
not displayed. Then you can follow the instructions from step
12. When the local service provider does not support DTV
broadcasting but you choose a DTV supporting country, it
enters the DTV Plug & Play but DTV functions may not work
properly.When
No is selected, follow the instructions from step
7 to 10. When Yes is selected, follow the instructions from
step 11.
7 Select No pressing the ◄ or ► button, then press the
ENTER/OK button. Auto Store menu is displayed.
8 Press the ENTER/OK button to start search the channels.
The channel search will start and end automatically. After all the
available channels are stored, Clock Set menu is automatically
displayed. Press the ENTER/OK button.
➢
To stop the search before it has finished, press the
ENTER/OK button with Stop selected.
9 Press the ◄ or ► button to select Month, Day, Year, Hour, or
Minute. Set these by pressing the ▲ or ▼ button.
➢
You can set the Month, Day, Year, Hour, or Minute
directly by pressing the numeric buttons on the remote
control.
10 Press the ENTER/OK button to confirm your setting. The
message Enjoy your viewing is displayed. When you have
finished, press the ENTER/OK button.
➢
Even if the ENTER/OK button is not pressed, the message
will automatically disappear after several seconds.
11 Select Yes
pressing the ◄ or ► button, then press the
ENTER/OK button. Auto Store menu is displayed.
12 Press the ENTER/OK button to start search the analog
channels. The analog channel search will start and end
automatically. After all the available analog channels are stored,
the screen for searching digital channels is automatically
displayed.
➢
To stop the search before it has finished, press the
ENTER/OK button with Stop selected.
13 Press the ENTER/OK button to start search the digital
channels. The digital channel search will start and end
automatically. After all the available digital channels are stored,
the screen to select a time zone is displayed depending on the
country.
➢
To stop the search before it has finished, press the
ENTER/OK button with Stop selected.
➢
If the DTV channel is updated, the Source in the source list
of the Input menu is automatically changed to DTV.
➢
For detailed descriptions about DTV channel update, refer
to page 36 of this manual.
14 Press the ▲ or ▼ button to select required time zone, then
press the ENTER/OK button. The screen for setting the time is
displayed. Press the ENTER/OK button.
Continued...
Plug & Play
Some DTV functions may not be available.
Digital Scan?
Move
Enter
Skip
Yes
No
Plug & Play
P 1 C -- 40 MHz
0 %
Enter
Skip
Start
Plug & Play
0%
Services found: 0 Channel:
-
Skip
Start
Plug & Play
Move
Adjust
Enter
01 01
2007
12
:
00
Clock Set
Month Day Year Hour
Minute
Plug & Play
Scanning for digital services...
29%
Services found: 6 Channel: 35
Skip
Stop
Plug & Play
Move
Select
Skip
The Iberian Peninsula and Balears Islands
Canarian Islands
BN68-01330A-00Eng.indd 11 2007-08-15 ¿ÀÈÄ 5:03:53