Filter
Top Products
English - 12
Viewing an External Signal Sources
You can switch between viewing signals from connected
equipment, such as a VCR, DVD, Set-Top Box, and the TV
source (broadcast or cable).
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
ENTER/OK button.
3 Press the ENTER/OK button again to select Source List.
4 Press the ▲ or ▼ button to select the signal source, then press
the ENTER/OK button.
Available signal sources:
TV, Ext.1, Ext.2, Component, PC,
HDMI, DTV
➢
You can select these options simply by pressing the SOURCE
button on the remote control.
➢
To watch television programme again, press the TV/DTV button
and select the channel number required.
15 Press the ◄ or ► button to select Month, Day, Year, Hour, or
Min. Set these by pressing the ▲ or ▼ button.
➢
You can set the Month, Day, Year, Hour, or Minute
directly by pressing the numeric buttons on the remote
control.
16 Press the ENTER/OK button to confirm your setting. The
message Enjoy your viewing is displayed. When you have
finished, press the ENTER/OK button.
➢
Even if the ENTER/OK button is not pressed, the message
will automatically disappear after several seconds.
If you want to reset this feature …
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER/OK button.
3 Press the ENTER/OK button again to select Plug & Play.
The message Start Plug & Play is displayed.
OK
Enjoy your viewing
Plug & Play
Set the current time.
Adjust
Move
Select
Skip
01
15
Month Day Year
Hour Min
2007
12 00
Move
Enter
Return
Source List : TV
Edit Name
Input
T V
Move
Enter
Return
TV
Ext.1 : −−−−
Ext.2 : −−−−
Component : −−−−
PC : −−−−
HDMI : −−−−
DTV : −−−−
Source List
T V
Move
Enter
Return
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Medium
PC
Home Theatre PC : Off
Light Effect
:
In Standby
Wall-Mount Adjustment
Energy Saving : Off
More
Setup
T V
BN68-01330A-00Eng.indd 12 2007-08-15 ¿ÀÈÄ 5:03:55