Filter
Top Products
English - 23
For more information on the 3D glasses (including the Emitter), refer to the user manual of your 3D glasses.
Adjust the PC resolution
- PS42A450 : 1024 x 768@60Hz
- PS50A450 : 1024 x 768@60Hz
1360 x 768@60Hz
The 3D IR Emitter communicates with the 3D glasses.
Therefore, the 3D IR Emitter should be located near the 3D glasses.
It is activated when the HDMI or DVI input signal is RGB, and DVI Sound is supported.
When the power is turned on or off, the mode changes to the default (Off) and the Format is saved.
The 3D Effect is turned on or off regardless of the Picture Mode.
When 3D Effect is on, only the Contrast, Brightness, 3D Effect, and Reset picture menus are
activated.
To use the 3D Effect function, a graphics card supporting 3D or 3D software is required.
The 3D glasses and the Emitter must be manufacturer by the same company.
If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may
experience eyestrain or a headache.
3D glasses (including the Emitter) not manufactured by Samsung may not be supported.
If you find the screen flickering while the 3D function is used, change the environmental lighting
darker or turn off the fluorescent lamp to watch the screen for its best condition.
Changing the Mode
Provides the function to turn on the 3D Effect. You can choose
between Mode1 and Mode2. To achieve the 3D Effect, the 3D
glasses shutter back and forth from the left to right and vice versa
(left/right sync).
1
Connect the TV, PC and 3D IR Emitter as shown in the figure.
2 Press the SOURCE button to select HDMI2 .
3 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the
ENTER button.
4
Press the ▲ or ▼ button to select Picture Options then press
the ENTER button.
Press the ▲ or ▼ button to select 3D Effect then press the
ENTER button.
5
Press the ▲ or ▼ button to select Mode, then press the
ENTER button.
Press the ▲ or ▼ button to select Off, Mode1 or Mode2 then
press the ENTER button.
• Off : Turns the 3D Effect function off.
• Mode1 : Mode 1 operates with right sync first.
• Mode2 :
Mode 2 operates with left sync first.
If the 3D effect is not working properly, it means the Mode and
3D glasses may not be syncing properly. To put them in sync,
switch to the other mode.
Changing the Format
Select the optimal input format to match your graphic cards or 3D
software.
See the descriptions for Steps 1 to 4 above.
5
Press the ▲ or ▼ button to select Format, then press the
ENTER button.
6 Press the ▲ or ▼ button to select Checker Board, Horizontal
or Vertical then press the ENTER button.
Checker Board
If the output format of your graphic card or 3D software
is Checkerboard, select this input format.
Horizontal
If the output format of your graphic card or 3D software
is Horizontal interleaved, select this input format.
Vertical
If the output format of your graphic card or 3D software
is Vertical interleaved, select this input format.
Move
Enter
Return
Colour Tone :
Normal
Size : 16:9
Digital NR : Auto
Real 100Hz Demo : Off
DNle : On
HDMI Black Level : Normal
Blue only mode : Off
Screen Burn Protection
3D Effect
Picture Options
T V
Move
Enter
Return
Mode :
Standard
Cell Light 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Picture
T V
Move
Enter
Return
Mode : Mode 1
Format : Checker Board
3D Effect
T V
Off
Mode 1
Mode 2
Move
Enter
Return
Mode : Mode 1
Format : Checker Board
3D Effect
T V
Checker Board
Horizontal
Vertical
책1.indb 23 2008-03-17 오후 4:21:35