Filter
Top Products
English - 10
Plug & Play Feature
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby mode, press the POWER button
on the remote control. The message Start Plug & Play. is
displayed. Press the ENTER button. Language menu is
displayed.
2 Select the appropriate language by pressing the ▲ or ▼
button. Press the ENTER button. The message Select Home
Use nwhen installing this TV in your home. is displayed.
3 Press the ◄ or ► button to select Store Demo or Home Use,
then press the ENTER button. The message to check the
connected status of the antenna is displayed.
➢
The default selection is Home Use.
We recommend setting the TV to Home Use mode for
the best picture in your home environment.
Store Demo mode is only intended for use in retail
environments.
If the unit is accidentally set to Store Demo mode and
you want to return to Home Use (Standard): Press the
Volume button. When the volume OSD is displayed,
press and hold the MENU button for 5 seconds.
4 Make sure that the antenna is connected to the TV.
Press the ENTER button. Area menu is displayed.
5 Select your country or area by pressing the ▲ or ▼ button,
then press the ENTER button. Auto Store menu is displayed.
6 Press the ENTER button to start search the channels.
The channel search will start and end automatically. After
all the available channels are stored, Clock Set menu is
automatically displayed. Press the ENTER button.
➢
To stop the search before it has finished, press the
ENTER button with Stop selected.
7 Press the ◄ or ► button to select Month, Day, Year, Hour,
Minute or am/pm. Set these by pressing the ▲ or ▼ button.
➢
You can set the Month, Day, Year, Hour, and Minute
directly by pressing the numeric buttons on the remote
control.
8 Press the ENTER button to confirm your setting.
The message Enjoy your viewing is displayed.
When you have finished, press the ENTER button.
➢
Even if the ENTER button is not pressed, the message will
automatically disappear after several seconds.
Continued...
Plug & Play
Start Plug & Play.
OK
Enter
Plug & Play
Language
Move
Enter
English
Français
Plug & Play
Area
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
▼
Plug & Play
P 1 C
--
40 MHz
0 %
Enter
Skip
Start
Plug & Play
Check antenna input.
Enter
Skip
OK
Plug & Play
Select Home Use
when installing this TV in your home.
Move
Enter
Store Demo
Home Use
Plug & Play
Move
Adjust
Enter
Clock Set
Month Day Year Hour Minute
am/pm
Move
Enter
Skip
--
--
----
--
--
am
▼
▼
Enjoy your viewing
OK
책1.indb 10 2008-03-17 오후 4:21:19