Filter
Top Products
English - 41
How to assemble the Stand-Base (depending on the model)
Using the screws for securing the stand base and the monitor, firmly
attach the monitor to the stand base.
(The exterior of the set may be different from the picture.)
In case of installing your
TV on the wall, close the
cover (1) on the stand-base
connection part using two
screws for hiding.
Warning
Firmly secure the stand to the TV before
moving it, as the stand may fall and could
cause serious injury.
➢
Two or more people should carry
the TV. Never lay the TV on the floor
because of possible damage to the
screen.
Always store the TV upright.
Moving to the remembered position
1
Complete Step 1 of Entering the menu.
2 Pressing a Colour (Red, Green, Yellow) button moves the auto wall
mount to the saved position.
➢
You can move the wall mount to one of the 3 pre-set positions
by pressing the Red (Position 1), Green (Position 2) or Yellow
(Position 3) buttons.
➢
If you adjust the positon after moving to a pre-set position, the
position display will disappear.
➢
For installation, refer to the Installation Manual provided with the wall
mount.
➢
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
➢
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
➢
The auto wall mount will not work when Anynet+ is operating.
➢
42 inches model is not compatible with the older wall mount model (WMN5090A).
Wall-Mount Adjustment
Adjust
Save Center
►
►
►
►
►
►
►
►
321Position
Position 1
책1.indb 41 2008-03-17 오후 4:21:52