Filter
Top Products
CHAPTER THREE: TV OPERATION 3.3
Using the Perfect Focus Feature
(HCL652W/HCL6515W/HCL4715W/HCL473W/HCM5525W/
HCM553W/HCM6525W/HCM653W)
When the picture size is distorted after moving the TV set, use the Perfect Focus feature to
adjust for the optimum picture size set in the Factory.
1
Press the Menu button .
Move the joystick down to
select “FUNCTION”, then
press the joystick to enter.
2
Move the joystick down to
select “Convergence”, then
press the joystick to enter.
3
Move the joystick down to
select “Perfect Focus”,
then press the joystick to
enter.
Perform Perfect Focus in
the following sequence:
green ➝ red ➝ Blue.
The Perfect Focus feature
ends after the cursor flick-
ers for one second.
Press Menu button to exit.
OPERATION
Notes
• If any error happens during Perfect Focus, then perform Perfect Focus once again.
• If you can’t make adjustments after Perfect Focus, then make manual adjustments. Still you
can’t make adjustments, contact your Service Center.
• The Perfect Focus function doesn’t operate when component input is in 480P.
01509D(E)-CHAPTER 3 2004/10/19 09:20 AM Page 3