Samsung HCM653W Projection Television User Manual


 
CHAPTER FOUR:SPECIAL FEATURES 4.8
SPECIAL
FEATURES
Choosing a Multi-Channel Sound (MTS)
Soundtrack
Depending on the particular program being broadcast, you can listen to stereo, mono, or a
Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP
has unrelated information like news or weather.)
2
Move the joystick down to
select “MTS”, then move the
joystick to the left or right to
select “Mono,” “SAP,” or
“Stereo.”
Press the Menu button to exit
The text at the bottom of the
menu tells you if the incoming
audio is stereo, SAP, or mono.
Quick way to access the MTS
menu: Just press the “MTS” button
on the remote control.
1
Press the Menu button.
Move the joystick down to
select “SOUND”, then
press the joystick to enter.
Choose Stereo for channels that are broadcasting in stereo.
Choose Mono for channels that are broadcasting in mono, or if you are
having difficulty receiving a stereo signal.
Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
: Sound.
: Only bass of the sound (weak).
: No Sound.
The above table applies to only
softwares, equipments (DVD, VCR,
etc.) or broadcasting signals cover-
ing Dolby Surround Output.
Dolby Surround Output Table (Output connector and signals)
Mode
Normal
Wide
Phantom
Off
Playback/Broadcast
Signal
Mono
Stereo
Mono
Stereo
Mono
Stereo
Mono
Stereo
Left Output Right Output Center Output Surround Output
(left and right)
01509D(E)-CHAPTER 4 2004/10/19 09:22 AM Page 8