Filter
Top Products
2CHAPTER TWO: INSTALLATION 2.8
Connecting a DVD Player, DTV Set-Top Box
(480i, 480p, 1080i)
The rear panel jacks on your TV make it easy to connect a DVD player (or DTV Set-Top
Box) to your TV.
Connecting to Y, P
B
, P
R
1
Connect a set of audio cables between
the DVD audio in jacks on the TV and
the AUDIO OUT jacks on the DVD player
(or DTV Set-Top Box).
2
To enable Component video viewing,
connect video cables between the Y, P
B
,
and P
R
inputs on the TV and Y, P
B
, and P
R
(or Y, C
B
, C
R
) outputs on the DVD player
(or DTV Set-Top Box).
Note: For an explanation of
Component video, see your DVD
player’s (or DTV Set-Top Box) owner’s
instruction.
Connecting to regular audio and video jacks
1
Connect a set of audio cables between
the AUDIO IN jacks on the TV and the
AUDIO OUT jacks on the DVD player
(or DTV Set-Top Box).
2
Connect video cables between the
VIDEO OUT jack on the DVD player
(or DTV Set-Top Box) and the VIDEO
IN jack on the TV.
Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may
be different, depending on the model.
INSTALLATION
00054A-02-CHAPTER 2 2004/10/19 01:01 PM Page 8