Samsung HCN553W Projection Television User Manual


 
C
HAPTER THREE: TV OPERATION
3.5
OPERATION
4
While “Red” is highlighted, press
the VOL + button: A crosshair
pattern will appear on the screen.
After moving the cursor to the
position you want to adjust using
the number buttons 2(up), 4(left),
6(right), 8(down) on the remote
control, adjust Red Convergence
by pressing the VOL +/ VOL -/CH
/CH buttons.
5
If a horizontal red line is visible, use
CH and CH buttons to move
the line so that it is superimposed on
the horizontal center-line (i.e., make
a single horizontal line that is as
white as possible.)
6
If a vertical red line is visible, use
the VOL + and VOL - buttons to
move the line so that it is superim-
posed on the vertical-center line
(i.e., make a single vertical line that
is as white as possible.)
Adjust Red Convergence
7
For ‘Blue’ adjustment, do the same as the above.
After the red convergence is correctly adjusted, press Menu to exit
all the menus.
00054A-02-CHAPTER 3 2004/10/19 01:05 PM Page 5