Samsung HL-P4663W Projection Television User Manual


 
Picture Control
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”
and “Tint” according to personal preference. (Alternatively, you can use one of the automatic
settings. See next page.)
Using Automatic Picture Settings
Your TV has automatic picture settings (“Dynamic”, “Standard” and “Cinema”)
that are preset at the factory. You can activate either “Dynamic”, “Standard” or
“Cinema” by pressing the P.MODE button (or by making a selection from the
menu). Or, you can select “Custom” which automatically recalls your
personalized picture settings.
1
Press the MENU button.
Press the or button to select
“Picture”, then press the ENTER button.
2
Press the ENTER button to select “Mode”.
3
Press the ENTER button again to select
“Mode”.
Press the or button to select a
particular item, then press the ENTER
button.
Press the EXIT button to exit.
Alternate method
Press the P.MODE button on the remote control
repeatedly to select one of the standard picture
settings.
Choose “Dynamic” for viewing the TV during the day or when there is a
bright light in the room.
Choose “Standard” for the standard factory settings.
Choose “Cinema” when viewing a movie.
35
Operation
34
Standard
Customizing the Picture
1
Press the MENU button.
Press the or button to
select “Picture”, then press
the ENTER button.
2
Press the ENTER button to
select “Mode”.
3
Press the or button to
select a particular item, then
press the ENTER button.
Press the œ or button to
increase or decrease the
value of a particular item.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory default picture settings.
4
Press the MENU button to
display the “Mode” menu.
Press the or button to
select “Reset”, then press the
ENTER button.
The previously adjusted
picture settings will be reset
to the factory defaults.
Contrast
90
Picture
Mode : Standard
Color Tone : Warm1
Size
Digital NR : Off
DNIe : On
MCC
Film Mode : Off
PIP
Move Enter Return
Input
Picture
Sound
Channel
Setup
Mode
Mode : Standard
Contrast 90
Brightness 50
Sharpness 50
Color 50
Tint 50 50
Reset
Move Enter Return
Input
Picture
Sound
Channel
Setup
Picture
Mode : Standard
Color Tone : Warm1
Size
Digital NR : Off
DNIe : On
MCC
Film Mode : Off
PIP
Move Enter Return
Input
Picture
Sound
Channel
Setup
Mode
Mode : Standard
Contrast 90
Brightness 50
Sharpness 50
Color 50
Tint 50 50
Reset
Move Enter Return
Input
Picture
Sound
Channel
Setup
Mode
Mode : Standard
Contrast 90
Brightness 50
Sharpness 50
Color 50
Tint 50 50
Reset
Move Enter Return
Input
Picture
Sound
Channel
Setup
Dynamic
Standard
Cinema
NOTE
•“Tint” doesn’t operate
in PC, DVI, HDMI or
480p-Component or
higher modes.
Mode
Mode : Standard
Contrast 90
Brightness 50
Sharpness 50
Color 50
Tint 50 50
Reset
Move Enter Return
Input
Picture
Sound
Channel
Setup
BP68-00283A-02(24~45) 5/6/04 11:33 AM Page 34