Filter
Top Products
Using the D-Net
English - 118
The D-Net control panel
Select an IEEE1394 from the D-Net device list. The TV will then display the D-Net control panel.
This panel allows you to use the TV remote control to control the selected IEEE1394 device.
1
Press the D-Net button on the remote control.
2
Press the … or † button to select a
D-Net (IEEE1394) connected device.
Press the ENTER button.
3
Use the …, †, œ, √ buttons on the remote
control to move through the options (see next
page) available in the D-Net control panel.
4
Press the ENTER button to select an option.
5
To view the IEEE1394 device in FULL SCREEN,
press the EXIT button on the remote control.
• The D-Net control panel appears on the
bottom of the screen.
•To exit D-Net mode, select DTV from the
D-Net device list or press the SOURCE
button on the remote control.
NOTE
• For information about how to use the icons, refer to the following page.
Copy-free
Copy-free
BP68-00520A-00Eng(108~125) 6/3/05 3:57 PM Page 118