Filter
Top Products
English - 25
Connecting a VCR and DTV Set-Top Box
1
Connect the Video/Audio
cables between the VIDEO
or S-VIDEO/AUDIO input
jacks on the TV and VIDEO
or S-VIDEO/AUDIO output
jacks on the VCR.
2
Connect the Video/Audio
cables between the VIDEO
or S-VIDEO/AUDIO input
jacks on the TV and VIDEO
or S-VIDEO/AUDIO output
jacks on the Set-Top Box.
3
Use the coaxial cable to
connect between the splitter
and the ANT 1 IN (CABLE)
on the TV and between the
splitter and the ANT IN on
the Set-Top Box.
4
Connect a coaxial cable
between the Antenna in
terminal on the VCR and the
Antenna out terminal on the
Set-Top Box.
Connecting to HDMI (High Definition Multimedia Interface)
1
Connect an HDMI cable
between the HDMI IN1jack on
the TV and the HDMI OUT jack
on the Set-Top Box.
NOTES
• For an explanation of Component
video, see your Set-Top Box owner’s
manual.
TV Rear Panel
DTV Set-Top Box
Stereo VCR
Incoming Cable
or Antenna
1
4
3
2
TV Rear Panel
DTV Set-Top Box
Incoming
Cable or
Antenna
1
BP68-00520A-00Eng(018~029) 6/13/05 9:33 AM Page 25