Samsung HL-S5086W Projection Television User Manual


 
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Setting the language, checking the antenna input, memorizing the channels, and setting the time.
NOTE
The Plug & Play function operates after plugging in the TV for the first time.
English - 26
Operation
1
Press the POWER button on the remote
control. The message “Menu language,
Channels and Time will be set.” is
displayed.
Press the ENTER button, then the
Language menu is displayed.
2
Press the ENTER button to enter the
language. Press the or button to
select language, then press the ENTER
button. “Selects the antenna to execute
the Auto Program Function.” menu is
automatically displayed.
3
Press the or button to memorize
the channels of the selected connection.
Press the ENTER button to select “Start”.
Continued...
Plug & Play
Skip
Select the language of the OSD.
Language
English
Español
Français
Plug & Play
Enter Skip
Air
Cable
Air+Cable
Selects the antenna to execute the
Auto Program function.
Start
Start
Start
Move
Enter
Move
If the antenna is connected to ANT 1
IN (CABLE), select “Cable” and if it
is connected to ANT 2 IN (AIR),
select “Air”.
If both ANT 1 IN and ANT 2 IN are
connected, select the “Air + Cable”.
The Language menu will automatically
appear after several seconds, even if
the ENTER button is not pressed.
The message to check the connected
status of the antenna is displayed.
Menu language, Channels and
Time will be set.
i
Start
BP68-00586A-00Eng(026~047) 2/13/06 2:18 PM Page 26