Samsung HL-S5086W Projection Television User Manual


 
English - 45
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select “Input”.
2
Press the ENTER button to
select “Source List”.
Press the or button to
select a signal source, then
press the ENTER button.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
NOTES
Only connected devices can be selected.
Before selecting an input source, connect an external device first.
HDMI input can be selected only when the external device is
turned on and connected to the TV.
AV1
When you connect
equipment to the TV,
you can choose
between the following sets of jacks: “AV1”, “AV2”,
“S-VIDEO1”, “S-VIDEO2”, “COMPONENT1”,
“COMPONENT2”, “PC”, “HDMI1”, or “HDMI2” on the TV’s
rear panel and “AV3” on the TV’s side panel.
Input
Source List : TV
Edit Name
WISELINK
Move Enter Return
Source List
TV
AV1 :
----
AV2 :
----
AV3 :
----
S-Video1 :
----
S-Video2 :
----
Component1 :
----
Move Enter Return
More
BP68-00586A-00Eng(026~047) 2/13/06 2:18 PM Page 45