Filter
Top Products
English-13
Changing Channels
Using the Channel Buttons
1
Press the CH
/
buttons to change channels.
When you press the CH
/
buttons, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have memorized at
least three channels.) You will not see channels that were either erased or not memorized.
Using the PRE-CH Button to select the Previous Channel
1
Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the PRE-CH button to quickly
alternate between them.
Chapter Three
SPECIAL FEATURES
Adjusting the Volume
1
To control speaker volume.
2
To control headphone volume.
- when headphone is connected.
When a headphone is connected, the Volume Control OSD screen changes automatically as
in number 2.
Press the VOL +/– buttons to increase or decrease the volume.
1
Press MUTE and the sound cuts off.
The word “ ” will appear in the lower-left corner of the screen.
2
To turn mute off, press the MUTE button again, or simply press the VOL +/- buttons.
Using Mute
At any time, you can temporarily cut off the sound using the Mute button.
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the Power button on the front panel.
BN68-00870A-00Eng 1.qxd 1/15/04 12:48 AM Page 13