Samsung LN-R1742 Flat Panel Television User Manual


 
English-59
Installing the Wall Mount Kit
APPENDIX
How to adjust an angle
When bracket is assembled on the wall
How to hang monitor up on a hook When installation is completed
(1)
Angle adjustment section of
general stand-besd LCD TV
(2)
Angle abjustment section
while converting the form
(1->3, 3->1)
(3)
Angle adjustment section of
wall-mounted LCD TV
Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be com-
pletely fixed to the bracket.
4
Remove Installation Guide after completing setup of LCD TV on the wall.
5
Push the LCD TV up and shift to the right to detach it from bracket.
When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.
6
Picture (1) shows the adjustment angle (0°~ 13°) when you use LCD TV in its general form (stand-based
LCD TV).
Excessive tilting can turn LCD TV over which might cause damage to LCD TV.
Picture (2) shows the adjustment angle (13
°~ 80°) when you convert stand-based LCD TV into wall-mounted
one.
Picture (3) shows the adjustment angle (0
°~ 10°) when you use wall-mounted LCD TV after fixing it to wall.
Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based
one to wall-mounted one or vice versa.
- Click" sound indicates section change from 1 to 2 or 3 to 2 (1->2, 3->2).
BN68-00870A-00Eng 4.qxd 1/15/04 12:51 AM Page 59