Filter
Top Products
22
GB
You can record a cassette at two different speeds:
PAL/SECAM/MESECAM NTSC/PAL-M
◆
SP (Standard Play)
◆
SP (Standard Play)
◆
LP (Long Play)
◆
SLP (Super Long Play)
In Long Play or Super Long Play modes:
◆
the recording is of a slightly lower quality.
To record a cassette: Press the REC.SPEED button on the
remote control, until:
in standard play mode SP is displayed.
in long play mode LP is displayed (PAL/SECAM/MESECAM).
in super long play mode SLP is displayed (NTSC/PAL-M).
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the or button, until the cursor is placed in front of the
USER SET option.
3 Press the button to select this option.
Result
: The cursor is set to the TAPE SELECT option.
4 Press the or button as many times as required, until the
correct cassette length is displayed.
E180/T120 E240/T160
E 300 E260/T180
5 Press MENU twice to exit the menu.
Selecting the Recording Speed
Type
Recording Time
PAL/ SECAM NTSC
E-180/T120 180 mins 120 mins
E-240/T160 240 mins 160 mins
E-260/T180 260 mins 180 mins
E-300 300 mins
N
DEX REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
1
2
3
4
5
6
STROBE AUDIO
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot
record on the tape.
1 If you wish to protect a cassette, break off the tab using a small
screwdriver.
2 To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
1
**
USER SET1
**
¨
TAPE SELECT :E180/
T120
CLOCK TYPE :12H
PLAY SYSTEM :AUTO
OSD :ON
USER SET2
¹
¨
END:(MENU)
00575A)SV-7000W-GB-2 11/19/99 3:45 PM Page 22