Filter
Top Products
37
GB
The tape counter:
◆
indicates the elapsed time in the play and record modes
(hours, minutes and seconds) ;
◆
is reset when a cassette is inserted in the VCR ; and
◆
enables you to find the beginning of a sequence easily.
☛ To enable the remaining time to be calculated correctly,
you must indicate the type of cassette being used. See
page 22.
1 Insert a cassette in your VCR.
2 Press CLK/COUNT twice.
Result
: The tape counter is displayed:
0:00:00.
➢ The tape counter does not necessarily start from zero at the
beginning of the tape.
3 Select the required operation (play, record, fast-forward, rewind).
Result
: The tape counter indicates how long the cassette has
been running.
4 To set the tape counter to zero at the beginning of a sequence:
◆ press DISPLAY twice to display the counter ; and
◆ press CLR/RST when you want to set the tape counter to
zero.
5 To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press
REW ( )
or F.F ( ).
Result
: The VCR stops automatically when the counter
reaches zero.
➢ Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 17).
Press DISPLAY:
◆ once to display the current function, program
number, recording speed, date, time and counter ;
◆ twice to display the counter only ;
◆ three times to display the time remaining on the
cassette ; and
◆ four times to clear the display.
PB DTR INDEX DUB PB DTR INDEX DUB Hi-FHi-Fii
EX REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
2
3
STROBE AUDIO
Using the Tape Counter
0:00:00
0
CLR/RST
100
R
E
W
P
L
A
Y
F
.
F
DISPLAY MONITOR A.DUB
REC
P/STILL
STOP
2
4
4
00575A)SV-7000W-GB-4 11/19/99 3:47 PM Page 37