Filter
Top Products
21
Connecting a Digital TV Set-Top Box
(480p/720p/1080i)
Connecting to Y, PB, PR
Connect the Y, PB, and PR video outputs of the set-top box to their corresponding inputs on the
TV. Next, connect the Left and Right audio from the set-top box to the corresponding L and R
terminals on the TV. (The connections for a typical set-top box are shown below.)
1
Connect a coaxial cable to the ANTEN-
NA IN terminal on the Set-Top Box and
the antenna terminal on the TV.
2
Connect a set of audio cables between
the COMPONENT 1 INPUT (L, R) or
COMPONENT 2 INPUT (L, R) jacks on
the TV and the AUDIO OUT jacks on the
Set Top Box.
3
Connect a video cable between the
COMPONENT 1 INPUT (Y, PB, PR) or
COMPONENT 2 INPUT (Y, PB, PR) jacks
on the TV and the VIDEO OUT (Y, PB, PR)
jacks on the Set Top Box.
Note: For detailed information, refer to
the Set Top Box instruction manual.
INSTALLATION
TV Rear Panel