Filter
Top Products
76
SPECIAL FEATURES
1
Turn off your VCR(or
DVD).
2
Press the MODE button and make sure that the VCR (or DVD) LED is
illuminated.
3
On your Samsung remote control, press the SET button.
▼
The remote control has five
modes: “TV”, “STB”,“VCR”, “Cable”
and “DVD”. Press the “MODE”
button to switch the remote control
to the “VCR” (or DVD) mode.
▼
4
Enter 3 digits of the VCR (or DVD) code listed on the 78 page for your
brand of VCR (or DVD).
Make sure you enter 3 digits of
the code, even if the first digit is a “0”.
(If more than one code listed, try the
first one.)
▼
5
Press the POWER button on the remote control. Your VCR (or DVD)
should turn on. If your VCR (or DVD) turns on, your remote control is
now set correctly.
If your VCR (or DVD) does not
turn on, repeat steps 2, 3, and 4, but
try one of the other codes listed for
the brand of your particular VCR
(or DVD).
▼
6
Once your remote control is set up, press the MODE button any time
you want to use the remote to operate your VCR (or DVD).
When your remote control is in
the “VCR” (or DVD) mode, the
volume buttons still control your
TV’s volume.
When your remote is in the “TV”
mode, the VCR (or DVD) control
buttons (PLAY, PAUSE, etc.) will still
operate your VCR (or DVD).
Customizing Your Remote Control
Your TV comes equipped with a “universal” remote control. In addition to
controlling the TV, the universal remote can also operate a Set-Top Box, VCR, DVD and a
cable box (even if your VCR, DVD and cable box are made by manufacturers other than
Samsung).
Note: The remote control might not be compatible with all DVD players, VCRs and Cable boxes.
Setting Up Your Remote Control to Operate Your VCR (or DVD)