Filter
Top Products
English - 26
OPERATION
Chapter Three
O
PERATION
Turning the TV On and Off
Press the POWER button.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically
and subsequently: Setting the language, Antenna input check, Channel Memorize and
Time Setting.
Note : The Plug & Play function operates after plugging in the TV for the first time.
1
Press the POWER button on
the remote control.
The message “Menu
language, channels and
Time will be set.” is
displayed.
Press the ENTER button, then “Select the language of the OSD” is
automatically displayed.
2
Press the ENTER button to
enter the language.
Press the … or † button to
select language, then
the ENTER button.
“Select the antennas to
memorize.” is automatically
displayed.
3
Press the … or † button
to memorize the channels
of the selected
connection. Press the
ENTER button to select
“Start”.
When selecting Cable TV :
Press the … or † button
to select “Cable”, then
press the ENTER button.
Press the … or † button
to select “STD”, “HRC”,
or “IRC”, then press the
ENTER button.
continued...
Select the antennas to memorize.
Air
Cable
Air + Cable
Start
Start
Start
Select the cable system.
STD
HRC
IRC
Select the language of the OSD.
Language :
English
Spanish
French
Menu language, channels,
and Time will be set.
Start
Plug & Play
Plug & Play
Plug & Play
œ Plug & Play feature doesn’t
work in the AV mode.
Selects English as the menu language.
Selects Air to execute the Auto Prgram
function.
Selects the STD as a signal type for your location.
œ STD, HRC, and IRC
identify various types of
cable TV systems. Contact
your local cable company
to identify the type of cable
system that exists in your
particular area.
AA68-03263C-00_eng_Chapter3 3/11/05 4:36 PM Page 26